Our manufacturing tolerance is ±1/32″ or 1 mm.
Warp specification is ±1/24” or 1.5 mm per lineal foot. Warp is measured with the door on the cabinet with hinges fully adjusted.
Components must be stored in a temperature-controlled environment upon delivery.
Doors are warrantied for warp if the warp exceeds the following tolerances:
Doors up to 24″ in height: maximum bow = 1/16″
Doors from 24″ to 48″ in height: maximum bow = 1/8″
Doors from 48″ to 72″ in height: maximum bow = 1/4″
Doors over 72″ are not warrantied for warp.
Share your suggestions below and help us make the NYDD experience even better.
Thank you for helping us build better.
